12-160 Operating System Recovery
8. At the prompt, insert the CD containing the operating system image (disk 1 if OS
occupies more than one disk). Wait until the LED on the DVD drive stops blinking
and then press [Enter].
9. Press [A] at the following prompt to accept the arguments and to begin the restore
process. Press [Enter].
or
Press [9] if you are recovering a dual drive system that is configured in a RAID. A
menu of the available drives is displayed. Select the secondary (RAID) drive.
Confirm Pending Operation
Mode is: restore
2) Drive is: USB/SATA Storage A Size: 250GB
3) Directory path is: /Images/
4) Filename is: nnnnnaaa
5) Reboot after operation complete: yes
6) Resize last data partition if possible: no
7) Resize last data partition to: Full Disk
8) Write zeros to drive before restore: no
9) RAID - restore to 2nd drive: none
A) Accept these arguments
V) View OS Documentation
Q) Quit and reboot
10. At the following prompt replace the CD with the next CD. Press [Enter] to continue.
+------+ Automatic mount +------+
|--------------------------------|
| Please, press “ok” to mount ---|
| [/dev/cdrom] on [mnt/cdrom] ---|
|--------------------------------|
|--------------------------------|
|------------+----+--------------|
|------------| Ok |--------------|
|------------+----+--------------|
|--------------------------------|
+--------------------------------+
11. Repeat the previous step for each CD as required.
12. Remove the last CD before the system reboots.
Note: The process automatically repeats for the secondary drive if the RAID option
was selected above.
13. Complete the OS installation as required per OS.
To Next Page
Loading...
