You can control the volume of incoming ringing, splash tone, Paging,
Background Music, Handsfree and your handset. Keysets consolidate all
adjustments into the volume buttons. Pressing the volume buttons when
the phone is idle will adjust the contrast level of the telephone’s display.
Set the specific feature volume for its most comfortable level.
1. Press the or keys.
1. or .
You must press these keys while on a
call.
Note: The volume must be set while the
feature is in use (for example, on an idle
telephone with no BGM, pressing either
volume key adjusts the LCD display). You
can, however, press the CALL key + 829
+ VOL UP or VOL DOWN to adjust ring-
ing at an idle phone.
To adjust volume for
incoming Paging,
BGM, Handsfree and
the handset:
To adjust the volume
of incoming ringing
and splash tone:
FLASH
VOL
CONF
MSG
Volume Down
Volume control for Handsfree, Handset,
Page, BGM and Riging, as well as
LCD Display Adjustment
Volume Up
N2IP-8
Volume Control
150
0893400_09.qxd 8/3/06 10:43 AM Page 150
To Next Page
Loading...
Need help?
General
