NEC DS1000 Quick Setup Guide

Section 1: Start-up Programming
1-16 ◆ Section 1: Start-up Programming DS1000/2000 Quick Setup Guide
4. Press VOL Up until you see:
5. Dial
3 (Busy/Ring No Answer Hunting for All Calls) and press VOL Up. You see:
6. Enter the Voice Mail master number +
HOLD.
If you don’t want to use Voice Mail, the overflow destination can be another extension or the
system attendant (e.g., 300).
7. Press
CONF and go back to step 3 to program another extension.
OR
Press
CONF twice to exit program 1807.
Changing the System Password
The default system passwords are:
To change the system password:
1. Enter the programming mode. You see:
2. Enter
9905 + HOLD. You see:
3. Enter the level (1-3) for the password you want to change +
HOLD. You see:
4. Enter the new password for the level selected (up to 8 digits) +
HOLD. You see:
5. Reenter the password you entered in step 4 above +
HOLD. You see:
6. Press
CONF to return to step 3 and select another password to change.
OR
Press
CONF twice to exit program 9905.
1807:EXT:nnn
HUNT TYPE?nnnn
1807:EXT:nnn
HUNT DEST?nnn
Password Level Password Level
System Administrator 1
0000 1
System Administrator 2
9999 2
Installer
372000 3
USER: nnn
ENTER PROGRAM?
9905:PASSWORD PROG
PASSWORD LVL?
9905:PASSWORD PROG
NEW PASS?
9905:PASSWORD PROG
CONFIRM?
9905:PASSWORD PROG
PASSWORD ACCEPTED

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English