Section 1: Start-up Programming
1-18 ◆ Section 1: Start-up Programming DS1000/2000 Quick Setup Guide
5. Enter the Call Coverage Key code for the selected key:
06 = Immediate ring Call Coverage Key
07 = Lamp only Call Coverage Key (no ring)
08 = Delay ring Call Coverage Key
6. Enter the number of the extension that should be covered (i.e., the co-worker’s extension) +
HOLD +
CONF. You see:
7. Go back to step 4 and select another key to program.
OR
Press
CONF to go back to step 3 and select another extension.
OR
Press
CONF twice to exit program 1701.
User Programmable Features
The User Programmable Features allow an extension user to dial mnemonics to customize the way certain
features work on their telephone, such as:
● Call Forwarding Clear All
● Headset Mode
● Hotline Key Assignment
1
● Off Hook Signaling Setup (including Camp On, Off Hook Ringing for trunk calls, and Voice Over for
Intercom calls)
● Paging (Incoming)
● Prime Line Assignment
● Programmable Function Key Assignment
● Programmable Function Key Ringing for Call Coverage, Hotline, Group Call Pickup, and Line Keys
● Programmable Idle Menu Soft Keys (Super Display)
● Ringing Line Preference
● Speed Dial Bin Setup
● Time and Date
● Voice Announce (for incoming Intercom calls)
1
An extension user can change the ringing for Hotline, Call Coverage, and Group Call Pickup Keys only if
they have the keys already programmed on their keyset. Turn to Programmable Function Keys on page 2-
24 for more on setting up these keys.
See the User Programmable Features chart on the next page for operation.
Note: To change an extension’s Access Level, see 1801 - Access Level in the Software Manual on the System
Document CD that came with your system.
ENTER KEY DATA
CALL CVR nnnnnn
1701:EXT:nnn
KEY NUMBER?n
To Next Page
Loading...
Need help?
General
