NEC DS1000 Quick Setup Guide

Section 1: Start-up Programming
DS1000/2000 Quick Setup Guide Section 1: Start-up Programming ◆ 1-19
1
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y , then SPK
to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.
Feature Mnemonic Numeric Operation Access Level
Call Forwarding Clear All
#CC #22
#CC
+ Y to clear (cancel) forwarding or N to
exit without clearing + SPK to hang up.
4 and 5
Headset Mode
#HS #47
#HS
+ Y to enable or N to disable + SPK to exit. 3-5
Hotline
#HL #45
#HL
+ Press flashing Hotline key + Enter exten-
sion for new Hotline partner + HOLD + Pro-
gram another Hotline key or
SPK to exit.
3-5
Off Hook Signaling
#OHS #647
#OHS
+ Select mode (C=Outside line, I=ICM,
D=Hotline) + Select option (see below) + SPK
to exit.
Outside line options: C =Camp On tone, O =Off
Hook Ringing,
0 = None
Intercom options: C=Camp On, V=Voice Over,
0=None
Hotline Options: C=Camp On, V=Voice Over,
0=None,
3-5
Paging (Incoming)
#VP #87
#VP
+ Y to enable or N to disable + SPK to exit. 3-5
Prime Line Assignment
#PLA #752
#PLA
+ Press one of your flashing programma-
ble keys or ICM + SPK to exit.
3-5
Programmable Function
Key Assignments
#KP #57
#KP
+ Press key you want to program + HOLD
+ ICM + Press VOL ▲ or VOL ▼ to select key
option + HOLD + (Enter any additional data if
required
1
+ HOLD) + Press VOL ▲ or VOL ▼ to
select another key to program, or CONF + SPK
to exit.
3-5
1
To set up a Night (System Mode System) key,
press CLEAR instead of entering additional data.
Programmable Function
Key Ringing
#RAC #722
Call Coverage Keys: #RAC + Call Coverage
Key repeatedly to select ringing mode + SPK to
exit.
Call Coverage Keys flash as follows: Lamp
only=On red, Immediate ring=On green, Delay
ring=Fast flash green.
2-5
#RAL #725
Outside Line Keys: #RAL + Line Key repeat-
edly to select ringing mode + SPK to exit.
Line keys flash as follows: Lamp only=On red,
Immediate ring=On green, Delay ring=Fast
flash green, Night ring=Slow flash green.
#RAP #727
Group Call Pickup Keys: #RAP + Group Call
Pickup Key repeatedly to select ringing mode +
SPK to exit.
Group Call Pickup Keys flash as follows: Lamp
only=On red, Immediate ring=On green, Delay
ring=Fast flash green.
Programmable Idle Menu
Soft Keys (Super Display)
#SM #76
Press the soft key you want to program (or press
Vol ▲ or Vol ▼ to scroll through the keys) +
HOLD + ICM + Vol ▲ or Vol ▼ to select key
option + HOLD + CONF + SPK to exit.
1-5

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English