NEC DS1000 Quick Setup Guide

Section 1: Start-up Programming
1-20 ◆ Section 1: Start-up Programming DS1000/2000 Quick Setup Guide
Ringing Line Preference
#RLP #757
#RLP
+ Y to enable or N to disable + SPK to
exit.
2-5
Speed Dial, Personal
#SP #77
#SP
+ Press bin key (for bins 701-710) or DIAL
then bin key (for bins 711-720) + HOLD + Dial
outside line (e.g., 1), Line group (e.g., 90-98), or
ICM for Intercom feature + HOLD + Number to
store + HOLD twice + Name + HOLD + Press
another bin key or SPK to exit.
1-5
Speed Dial, System
#SP #77
#SP
+ Dial System Speed Dial bin number
(e.g., 200) + HOLD + Dial outside line (e.g., 1),
Line group (e.g., 90-98), or
ICM for Intercom
feature +
HOLD + Number to store + HOLD
twice + Name + HOLD + Dial another System
Speed Dial bin or SPK to exit.
4 and 5
System Program Access
#*#*
#*#*
+ Enter programming password 3-5
Time and Date
#TD #83
#TD
+ Enter time in 24-hour clock using hours
(2 digits), minutes (2 digits) and seconds (2 dig-
its) + HOLD + Enter date using month (2 digits),
day (2 digits) and year (4 digits) + HOLD +
SPK to exit.
4 and 5
Intercom Voice Announce
(for incoming Intercom
calls)
#VA #82
#VA
+ V for voice announce or R for ring + SPK
to exit.
3-5
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y , then SPK
to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.
Feature Mnemonic Numeric Operation Access Level

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English