NEC DS1000 Quick Setup Guide

Section 2: Customizing Features
DS1000/2000 Quick Setup Guide Section 2: Customizing Features ◆ 2-19
2
2. Enter the number of the extension you want to add to a Pickup Group (e.g., 300) + HOLD. You see:
3. Press
VOL Up until you see:
4. Enter the number of the Pickup Group to which the extension should belong (1-8, 0=no group) + CONF .
5. Press CONF to go back to step 2 and select another extension to program.
OR
Press
CONF twice to exit program 1802.
Part II: Assign Group Call Pickup Keys to Extensions:
1. Enter the programming mode. You see:
2. Enter
1701 + HOLD. You see:
3. Enter the number of the keyset extension (e.g., 300) you want to program (see Part I) +
HOLD. You see:
4. Enter the number of the Programmable Function Key you want to assign as a Group Call Pickup Key
(1-24, depending on keyset type) +
HOLD. You see:
5. For the key selected, assign it as a Group Call Pickup Key (
09=immediate ring, 10=lamp only,
11=delay ring), then enter the Pickup Group number (1-8) + HOLD.
6. Press CONF to go back to step 4 and select another key to program.
OR
Press
CONF twice to go back to step 3 and select another extension to program.
OR
Press
CONF three times to exit program 1701.
Feature Quick Steps
To answer a call ringing a phone in your Pickup Group:
1. Lift handset + Press flashing Group Call Pickup Key or dial *#.
1802:EXT:302
ALLOW DND?nnn
1802:EXT:302
PK-UP GROUP NUM?n
USER: nnn
ENTER PROGRAM?
1701:KEY PROGRAMMING
EXTENSION #?nnn
1701:EXT:nnn
KEY NUMBER?n
1701:EXT:nnn KEY:nn
nnnnnnnn

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English