NEC DS1000 - Page 46

Section 2: Customizing Features
2-22 ◆ Section 2: Customizing Features DS1000/2000 Quick Setup Guide
5. To allow the Class of Service to put the system in the night mode, dial 9 (for yes) + VOL Up.
OR
To prevent the Class of Service from putting the system in the night mode, dial
6 (for no) + VOL Up.
6. Press CONF to return to step 3 and enter another Class of Service to program.
OR
Press
CONF twice to exit program 0101.
Part III: Assign Class of Service to Extensions
1. Enter the programming mode. You see:
2. Enter
1801 + HOLD. You see:
3. Enter the number of the keyset extension you want to program (e.g., 300) +
HOLD. You see:
4. Press
VOL Up until you see:
5. Enter the Class of Service (1-15) you want to assign to the extension selected +
HOLD. You see:
6. Press
CONF and go back to step 3 to select another extension.
OR
Press
CONF twice to exit program 1801.
Feature Quick Steps
To activate or deactivate Night Service:
1. Do not lift the handset + Press the Night key.
To answer a call that rings a line or loop key at night:
1. Lift handset + Press flashing line or loop key.
USER: nnn
ENTER PROGRAM?
1801:EXTENSION PROG
EXTENSION#?
1801:EXT:nnn
PT TYP?n:nnnnnn nnn
1801:EXT:nnn
CLASS OF SERVICE?n
1801:EXT:nnn
CLASS OF SERVICE?n