Setting Up the Telephone and DSS Console
36 ◆ Installation DSX-40 Hardware Manual
Setting Up the Telephone and DSS Console
Installing the DSX Keyset Handset and Line Cord.
When installing the handset, plug the handset cord into the handset jack on the bottom of the telephone. The
handset cord routes through the lower channel on the right side of the telephone base. The line cord does not
use a channel and drapes down from the telephone line cord jack or connects to the telephone legs.
Figure 16: Installing the Handset and Line Cord
Installing the DSX Keyset Optional Headset
When installing an optional headset, plug the headset cord in the headset jack on the bottom of the tele-
phone. The headset cord routes through the upper channel on the right side of the telephone base.
Figure 17: Installing the Optional Headset
To Next Page
Loading...
