Music Source
DSX-40 Hardware Manual Optional Equipment ◆ 55
Optional
Equipment
Music Source
Installing a Music Source
Your system provides two connections for customer provided music sources. Use these music sources for
Background Music and Music on Hold. Be sure the connected music sources are compatible with the follow-
ing music input specifications:
To connect a music source (two maximum):
1. Obtain an audio cable that has a mono audio minijack (1/8”) on one end and a connector compatible with
the customer’s music on the other.
2. Plug the mono audio minijack into one of the two Audio In connectors on the Main Equipment Cabinet.
3. Plug the other end of the audio cable into the music source.
Figure 35: Connecting a Music Source
Music Input Specifications
Input Impedance: 10K Ohms
Output Level: +18 dBr (+2 dBr) @ 1.0 KHz
1093097 - 25
Audio Cables
Audio In 2
Audio In 1
To customer-provided music sources (assigned in
programming to Background Music and
Music On Hold)
To Next Page
Loading...
