NEC DSX-40 - Wall Mounting a DSS Console; Wall Mounting a DSS Console on a Standard Wall Plate

Wall Mounting
60 ◆ Optional Equipment DSX-40 Hardware Manual
Wall Mounting a DSS Console
Wall Mounting a DSS Console on a Standard Wall Plate
To mount the DSS Console on the standard wall plate:
1. Locate and wire a standard wall plate in a convenient location.
2. Fold the DSS Console legs into the wall mount position.
3. Fold the two leg supports down flush with the legs.
4. Plug a short line cord into the DSS Console base.
• If required, coil the excess line cord into the cavity as shown.
5. Plug the other end of the short line cord into the wall plate.
6. Place the DSS Console on top of the wall plate and slide into place.
Figure 39: Mounting the DSS Console to a Standard Wall Plate
1093096 - 33
1
2
3
3
6
6
5
4