NEC DSX-40 - Keyset and DSS Console Two Position Angle Adjustment

Setting Up the Telephone and DSS Console
38 ◆ Installation DSX-40 Hardware Manual
Keyset and DSS Console Two Position Angle Adjustment
To set the low viewing angle position:
1. Fold the legs all the way back.
Figure 19: Setting the Low Viewing Angle
To set the high viewing angle position:
1. Flip up the two leg supports.
2. Fold the legs back until the leg supports contact the base.
Figure 20: Setting the High Viewing Angle
1093 0 9 6 - 34
1
109 3 0 9 6 - 3 5
1
2