Installing IntraMail
48 ◆ Optional Equipment DSX-40 Hardware Manual
To set up IntraMail:
1. Plug the IntraMail CompactFlash card into the Main Equipment Cabinet.
2. Reset the system. The IntraMail automatically installs.
- If updating from the Built-In Automated Attendant, just rerecord your Instruction Menu Messages.
Your Answer Schedule and Dial Action Table programing remain intact.
- By default, the first 16 (300-315) mailboxes are active/enabled and the IntraMail Automated Atten-
dant does not answer outside calls.
-
See Start-up IntraMail Programming in the front of the IntraMail section of the System Guide for more.
Figure 29: Installing IntraMail
1093097 - 21
1
2
To Next Page
Loading...
