NEC Dterm Series i User Manual

– 40 –
To Originate a Call Using Speed Calling (-Station/Group)
Press the Redial button.
Press the desired speed calling number.
To Originate a Call Using Speed Calling – System
To program Speed Calling – System key (on One-Touch Speed Calling key)
Press Feature key.
Press desired One-Touch Speed Calling key. The LCD displays previously stored digits.
Dial the “Speed Calling – System” access code and the abbreviated call code.
Press Feature again.
To operate from the Speed Calling – System key
Press the “Speed Calling – System” key.
If the D
term
does not have the “Speed Calling – System” key, dial the “Speed Calling – System” access code,
then the abbreviated call code.
To operate from the Directory key
Press the Directory key.
Dial the abbreviated call code (maximum of 4 digits).
XXXXXX
LNR[ ]/SPD[_ _] –X
*
4:26 PM TUE 13 APR 2004
SPEED SET
4:26 PM TUE 13 APR 2004
XXXX
4:26 PM TUE 13 APR 2004
XXXX

NEC Dterm Series i Specifications

General

Type	Digital Telephone
Speakerphone	Yes
Headset Jack	Yes
Dimensions	Varies by model
Weight	Varies by model
Display	LCD
Programmable Buttons	Yes
Power Supply	Powered by the phone system
Memory	Varies by model