NEC Dterm Series i - Boss;Secretary Message Waiting Control; Set MW at Boss Station (With Caller); Set MW at Boss Station (Without Caller); Cancel MW at Boss Station (Without Caller)

– 75 –
Call Redirect
Example: D
term
Station A views on the D
term
display the Station Number or Caller ID of an Incoming Call and
immediately redirects the call by pressing a Function Key. The destination of the Call Redirect will be the
Call Forwarding-Don’t Answer Destination or the Recall Destination if the call is transferred without Call
Forwarding-Don’t Answer being set at the station.
Note: This feature is available in North America only.
Call Redirects to the Call Forward-Don’t Answer Destination:
Station A sets Call Forward-Don’t Answer to Station B.
Station C dials Station A, it rings and displays Station C’s number on the display.
Station A presses the Call Redirect Key.
REDIRECT is displayed on the LCD, and the call immediately forwards to Station B.
Using the Soft Key
Station A sets Call Forward-Don’t Answer to Station B.
Station C dials Station A, it rings and displays Station C’s number on the display.
Station A presses the REDIR Soft Key.
REDIRECT is displayed on the LCD, and the call immediately forwards to Station B.
- Or -
Call Redirects to the Recall Destination when call is transferred without Call Forwarding-Don’t
Answer being set.
Station B calls Station C.
Station C answers the call and transfers it to Station A and then releases the call.
Station A rings.
Station A presses the Call Redirect Key.
REDIRECTING is displayed on Station A and the call immediately recalls to Station C.