NEC Dterm Series i User Manual

– 72 –
Boss/Secretary – MW Lamp Control
To set MW at boss’ station
With caller on the line
Lift handset or press Speaker.
Press boss’ ringing line. Ask calling party to hold.
Press the MW-SET line/feature key.
No service set tone is heard.
Boss sees MW on display and can call secretary to receive message.
Without caller on the line
After taking message, press Recall and receive dial tone.
Press the MW-SET line/feature key. Receive service set tone.
Note: The secretary can hang up after taking a message, and set a message
lamp at any time by going off-hook on the boss’ multiline and pressing the MW-SET key.
To cancel at boss’ station
Without caller on the line
Lift handset or press Speaker. Receive dial tone.
Press Boss’ line appearance.
Press MW-CANCEL line/feature key. Receive service set tone.
With caller on line
While engaged in conversation on boss’ multiline, press MW-CANCEL key.
No service set tone is heard.
4:26 PM TUE 13 APR 2004
MW SET
4:26 PM TUE 13 APR 2004
MW SET
4:26 PM TUE 13 APR 2004
MW CANCEL
4:26 PM TUE 13 APR 2004
MW CANCEL

NEC Dterm Series i Specifications

General

Type	Digital Telephone
Speakerphone	Yes
Headset Jack	Yes
Dimensions	Varies by model
Weight	Varies by model
Display	LCD
Programmable Buttons	Yes
Power Supply	Powered by the phone system
Memory	Varies by model