– 65 –
Call Back
If called station is busy
Press CALL BACK. Receive service set tone.
– Or –
Press the FLASH key and enter “Call Back” access code.
When both parties become idle, calling party’s phone rings. Calling party
would go off hook and hear ring back tone.
The called station would then be ringing.
Connection is established when the called party answers.
Note: Call Back may be programmed by the Telephony server admin. on a Pro-
grammable feature key or by the user on an One-Touch Speed Calling
key.
Using the Soft Key
Press CB Soft Key and receive service set tone.
“CALLBACK SET” is displayed and the CB Soft Key flashes on the display.
Called party
4:26 PM TUE 13 APR 2004
CALLBACK SET 2000
Called party
4:26 PM TUE 13 APR 2004
CALLBACK 2000
Called party
4:26 PM TUE 13 APR 2004
CALLBACK 2001
4:26 PM TUE 13 APR 2004
CALLBACK SET
MIC >>>
To Next Page
Loading...
