NEC Dterm Series i User Manual

– 54 –
– Or –
Lift handset or press Speaker.
Dial “Call Waiting” access code, receive dial tone.
Dial busy station.
Using the Soft Key
Dial desired station and receive busy tone.
Press CW Soft Key receive call waiting ringback tone.
To answer a waiting call
Call Waiting Tone is heard.
Press Answer.
Waiting call is automatically connected. Original party is placed on hold.
By repeatedly pressing Answer, it is possible to alternate between calls.
Display indicates connected station or trunk at any given time.
Using the Soft Key
Hear burst of tone Display indicates “C WAIT” and Answer button flashes.
Press Answer receive call waiting tone.
To disconnect
Press Recall. Station user is automatically connected to original party.
4:26 PM TUE 13 APR 2004
C WAIT
4:26 PM TUE 13 APR 2004
C WAIT SET 2000
Called station
number
4:26 PM TUE 13 APR 2004
C WAIT SET 2000
MIC >>>
Calling station
number
4:26 PM TUE 13 APR 2004
C WAIT 2001
Calling station
number
4:26 PM TUE 13 APR 2004
C WAIT 2001
MIC >>>

NEC Dterm Series i Specifications

General

Type	Digital Telephone
Speakerphone	Yes
Headset Jack	Yes
Dimensions	Varies by model
Weight	Varies by model
Display	LCD
Programmable Buttons	Yes
Power Supply	Powered by the phone system
Memory	Varies by model