NEC Dterm Series i User Manual

– 61 –
Using the Soft Key
Press FDB Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed; Call Forwarding – Busy Line is set.
To verify (with D
term
4D/8D/16D/16LD/32D)
Press FWD-BY.
Display indicates the station number calls are forwarded to.
Note 1: If recipient station is a D
term
4D/8D/16D/16LD/32D, LCD displays:
Note 2: With Soft Key operation, FDB flashes on the display.
To cancel
Press Speaker. Receive dial tone. If cancelling for another station, press
MULTILINE APPEARANCE.
Press FWD-BY or dial “Call Forwarding – Busy Line” cancel code.
Receive service set tone. LED goes out at your station
(or the D
term
of the multiline station).
Press Speaker. Call Forwarding – Busy Line is cancelled.
Using the Soft Key
Press FDB Soft Key.
Receive service set tone and “FORWARD CANCEL” is displayed.
4:26 PM TUE 13 APR 2004
FORWARD SET
MIC >>>
Forwarding station
4:26 PM TUE 13 APR 2004
FORWARD 2000
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
MIC >>>

NEC Dterm Series i Specifications

General

Type	Digital Telephone
Speakerphone	Yes
Headset Jack	Yes
Dimensions	Varies by model
Weight	Varies by model
Display	LCD
Programmable Buttons	Yes
Power Supply	Powered by the phone system
Memory	Varies by model