NEC Express 5800 Series - Setup Procedure

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
13
Chapter 1 Installing OS
1.
Setup Procedure
The flow-chart below illustrates the flow of the setup procedures for the server.
1.14 Backing up System Information
1.13 Enabling OS Boot Monitoring Function
1.12 Connecting and Configuring Options
1.1 Requirements for Setup
1.2 Preparations for Setup
Use Internal Disk
or
Use External Storage
1.3 Enabling internal disk
1.4 Enabling FC card
1.5 Disabling OS Boot Monitoring Function
1.7 Installing VMware ESXi
1.8 Installing ftSys Management Appliance
1.9 Installing ft control software
1.11 Setup after installing ft control software
Use External Storage
Use Internal Disk
1.6 Setting HBA configuration by using QLogic
1.10 Applying Patch Program
1.15 Setup Procedures upon Installing Guest OS
Setup completed