1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 1 Installing OS
1.7.2
Configuring ESXi
When LAN cables of the CPU/IO module 0 and 1 are removed, connect both of them.
Connect LAN cables to Port #1 connectors (1Gigabit) on CPU/IO modules 0 and 1. (At installation, the standard
switch (vSwitch0) is created on this connector.)
<R320d-E4 Model>
<R320d-M4 Model>
When the installed ESXi boots, press F2 and log in to the system as a root user.
On the System Customization menu, configure each item as shown below.
Connect LAN cable here.
Connect LAN cable here.
To Next Page
Loading...
