NEC Express 5800 Series - System Information; BMC Configuration

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
61
Chapter 1 Installing OS
1.14.2
System information
1. Run POST.
While the following message appears, press F4.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
2. When POST completes, the keyboard selection menu appears.
If you select your keyboard layout, the following menu will appear.
3. Choose Maintenance Utility – System Information Viewer – Display System Information –
System Information. Write down the following system information.
“Product Name”
“FR Number”
“Serial Number”
4. Press ESC several times until the following menu appears.
1.14.3
BMC Configuration
1. Choose BMC Configuration – BMC Configuration. Write down the BMC Configurations that have
changed.
< Example >
“Network : CPU/IO module0”-“Property”
“Network : CPU/IO module1”-“Property”
“User Management”-“User Account”
2. Press ESC some times until the following menu appears.
3. Choose “Exit” to exit.
Off-line TOOL MENU
Maintenance Utility
BMC Configuration
Exit
Off-line TOOL MENU
Maintenance Utility
BMC Configuration
Exit
Off-line TOOL MENU
Maintenance Utility
BMC Configuration
Exit