1. Steps for Configuring the Separate Log Server
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 3 Configuring the Separate Log Server
1.3
Installing Reporting Function onto Log Server
Install the report table of NEC ESMPRO onto the log server so that NEC ESMPRO Agent can send the ft
server-specific messages transferred to the log server to NEC ESMPRO Manager.
Note
If you want to change from the previously selected language to other language in the
language selection for the report table, you need to uninstall the package installed before
running the installer. When report table is uninstalled, restart NEC ESMPRO Agent.
# rpm -qa | grep ftexp-report-table
ftexp-report-table.[language ID]-[version]
# rpm -e ftexp-report-table.[language ID]
# /opt/nec/esmpro_sa/bin/ESMRestart
1. Log in to the log server as a root user.
2. Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of the
directory is unnecessary by mkdir command.
# mkdir /mnt/cdrom
# mount /dev/cdrom /mnt/cdrom
3. Run the command below to install NEC ESMPRO report table onto the log server.
# /mnt/cdrom/NEC/install.sh –e
4. Select a language for the report table. For English, select “E”, and for Japanese, select “J.”
Please choose a language for ESMPRO alert messages: [E(nglish) | J(apanese)].
5. Change directory, and unmouont ft control software Install DVD.
# cd /
# umount /mnt/cdrom
6. Restart NEC ESMPRO Agent on the log server.
# /opt/nec/esmpro_sa/bin/ESMRestart
To Previous Page
Loading...
Need help?
General