NEC Express 5800 Series - Configuring the Firewall for the Esxi Host from the Vsphere Client

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
41
Chapter 1 Installing OS
1.7.3
Configuring the Firewall for the ESXi Host from the vSphere Client
Connect to the ESXi host from vSphere Client to configure.
1. Connect to the ESXi host (ft server) from vSphere Client. In the [Configuration] tab, select [Software]
→ [Security Profile] → [Firewall] to open [Properties].
2. On the [Firewall Properties] screen, select the [syslog] checkbox and click [OK].
With this step, the ESXi installation has been completed.