1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 1 Installing OS
6. Move the cursor onto “SAS Option ROM Scan” and press Enter.
Parameters will be displayed.
< Example >
7. Among the parameters, choose “Enabled” and press Enter.
The current display of the configuration for SAS Option ROM Scan will be changed to “Enabled”.
8. Select an item other than SAS Option ROM Scan, and press Enter. Select Disabled from the
parameters displayed, and press Enter. Repeat these steps for all items other than SAS Option ROM
Scan.
9. Make sure that SAS Option ROM Scan shows Enabled, and all other items show Disabled.
<Example>
This is the end of steps for enabling internal disk.
Now the internal disks are enabled. Then, disable OS boot monitoring feature.
Go to "1.5 Disabling OS Boot Monitoring Function" and continue setup.
To Next Page
Loading...
