1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 1 Installing OS
12. To perform the following and the subsequent steps, open the console of ftSys Management Appliance,
and use the main menu (blue screen) to configure.
Important • The ESXi host and ftSys Management Appliance must exist on the same
network.
• Specify the DNS server from which you can obtain a correct hostname and IP
address. If an inappropriate DNS server is specified, installation may fail.
Tips You can configure the DNS server after completion of installation.
13. To use a static IP address:
From the main menu of ftSys Management Appliance, select [Configure Network]. Press 6 following
the prompt "Enter a menu Number [0]" to specify the IP address. Then, press 1 to return to the main
menu of ftSys Management Appliance.
14. To specify a time zone:
From the main menu of ftSys Management Appliance, select [Set Timezone] and select your area.
15. To change the initial password:
From the main menu of ftSys Management Appliance, select [Login] and log in as a root user with the
password "ftServer". Use the following command to change the password as necessary.
# passwd root
To Next Page
Loading...
