1. Bundled Software for the Server
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 2 Installing Bundled Software
10. Press the Ctrl+Alt keys to release the mouse, click the CD/DVD button on toolbar on the console of
vSphere Client to unmount the DVD drive that contains ft control software Install DVD, and then take
the ft control software Install DVD out from the DVD drive.
11. Restart the ftSys Management Appliance.
# reboot
12. Perform a basic configuration of the Manager Report (SNMP).
1. Start the ESMamsadm, see "Chapter 3 Report Features" – "1. Report Setting” – "Method of starting
the Control Panel (ESMamsadm)" of NEC ESMPRO Agent User's Guide.
2. Set a trap notification destination IP, see "Chapter 3 Report Features" – "2.1.1. Base Setting of
Manager (SNMP)" of NEC ESMPRO Agent User's Guide.
13. Perform the automatic discovery of servers in NEC ESMPRO Manager.
Perform the automatic discovery of servers according to NEC ESMPRO Server Management Guide.
You can download the NEC ESMPRO Server Management Guide from the following URL:
http://www.58support.nec.co.jp/global/download/index.html
To Next Page
Loading...
