NEC Express 5800 Series User Manual

SSA Scripting 93
Error code
Error message
Comment or clarification
has no free space.
2842
Invalid RAID
The specified RAID level is invalid or is not possible
with the current physical disk and array
configuration.
2843
Invalid Size
The specified size is invalid or is not possible with
the current configuration.
2844
Invalid Stripe Size
The specified stripe size is invalid, not supported by
the current RAID level, or not possible with the
current configuration.
2849
Invalid ClearConfigurationWithDataLoss
parameter
The valid parameters are Yes and No (default).
2850
Controller does not support Chassis Name
The controller does not support setting a chassis
name.
2851
Invalid Chassis Name
The entered chassis name is invalid. Use characters
from the set a–z, A–Z, 0–9, !, @, #, *, (, ), ,, -, _,
+, :, ., /, and [space]. The name cannot end with a
space character or exceed the maximum number of
characters allowed by the controller.
2852
Invalid SSP State
The requested SSP state is not a valid SSP state.
2853
Cannot change SSP settings
The SSP settings cannot be changed for the
controller or logical drive.
2854
Invalid SSP Adapter ID
The adapter ID is not a valid adapter ID that was
detected by the controller.
2857
Invalid Surface Scan Delay
—
2861
Controller does not support redundancy
settings
The controller is not redundant or does not support
redundancy settings.
2864
Invalid Preferred Path Mode
The specified value for the preferred path mode is
not valid, or the controller is not available.
2865
Invalid Preferred Path
The specified preferred path is not a valid chassis
slot for an available, active controller, or the
controller is not available.
2866
Failure opening capture file
—
2867
Failure opening input file
—
2868
Failure opening error file
—
2877
There are no suitable spares available
SSA found no drives that could be used as spares for
the specified array.
2880
Invalid Physical Disk Type Specified
—
2882
Invalid MNP delay
The specified value for MNP delay is invalid.
2883
Invalid Cache Logical Drive
The specified caching logical drive ID is invalid.
2884
Invalid Caching Array
The specified caching array ID is invalid.
2885
Error creating Caching Logical Drive
—
2886
Error creating Caching Array
—
2887
Error modifying Caching Volume
—
2888
Unable to modify Caching Arrays
Caching arrays cannot be modified once created.
2889
The requested Array modification is invalid
Error specifying the list of drives when reconfiguring
an array

NEC Express 5800 Series Specifications

General

Brand	NEC
Model	Express 5800 Series
Category	Server
Language	English