SSA Scripting 94
The value of the option supplied to this parameter is
invalid.
The controller returned an error for a command.
License Key Delete Failed
SSA is unable to delete the license key.
Invalid Number of Parity Groups
Chassis name is already in use
Another controller is already using the entered
chassis name.
The Auto Configure mode was unable to complete
auto configuration.
Cannot extend logical drive, not enough free
space for the requested size
Cannot extend logical drive, requested size
is too small
Cannot specify both SIZE and SHRINKSIZE
The input file cannot specify both a SIZE and
SHRINKSIZE parameter.
The array shrink operation was not successful.
The array move operation was not successful.
Invalid operation - Advanced Pack support
required
The requested operation requires a valid license key
to be entered.
Spare drives cannot be specified by a count
in Reconfigure mode
When in Reconfigure mode, the requested spare
drives must be specified by their addresses. A
simple count cannot be used.
Disk drives cannot be specified by a count in
Reconfigure mode
When in Reconfigure mode, the requested data
drives must be specified by their addresses. A
simple count cannot be used.
Invalid number of physical disks
Cannot create Array - no physical disks
specified
SSA cannot create an array unless physical disks are
specified in the input file DRIVE parameter.
SSP must be enabled in order to perform
this operation
For the specified operation, SSA requires SSP to be
supported and enabled.
The connectionname cannot be removed
when the hostmode has a non-default value.
This controller does not have host mode
modification capability
You need to have administrator rights to
continue
Another instance of SSA is already running
(possibly a service). Please terminate the
SSA application before running SSA
scripting.
To Next Page
Loading...
