SSA Scripting 95
Invalid Drive Cache setting. Valid options are
ENABLE and DISABLE.
Invalid or out of order Command
Verify the ordering of the commands in the input
configuration file.
Invalid or missing Array for Reconfigure
Expecting a valid array in Reconfigure mode
Invalid or missing Filename for Firmware
Update
The firmware filename supplied is not a valid
filename.
The firmware flash operation on the controller failed.
This controller has been configured with a
more recent version of software. To prevent
data loss, configuration changes to this
controller are not allowed. Please upgrade
to the latest version to be able to continue
to configure this controller.
Some changes to SOULAPI are not backward-
compatible. This check prevents the use of an older
version of software on a controller configured with a
newer version, possibly overriding changes and
destroying data.
Operations on this Array are temporarily
unavailable while the Array is transforming.
The user requested too many simultaneous
changes. For example, the user added new disks to
an array (expand array) and changed the size or
RAID level of logical volumes on the array. The
solution is for the user to wait until the array
transformation is complete.
Invalid value for NoBatteryWriteCache
A problem exists with the NOBATTERYWRITECACHE
command. Check the supplied argument. Not all
controllers support this operation.
Cannot delete Logical Drive
A problem occurred during the attempt to delete the
specified logical drive. The drive may be in use by
the OS, it may not exist, or it may not be the last
logical drive on the array.
The SplitMirror command is not valid for the
specified Array
The operation is not available. Older array
controllers/firmware may not support this command.
This command is only available when
running offline
The operation requested cannot be performed
online. Boot to offline SSA Scripting and supply the -
offline parameter.
Caching Volume parameters are not valid for
a data Volume
The parameters supplied are not applicable or valid.
Encryption Login command is not available
The Encryption command is not available
The Zeroize command failed
The controller firmware returned an error when
attempting to set zeroize the encryption
configuration.
The Firmware Lock/Unlock failed
The controller firmware returned an error when
attempting to lock or unlock the firmware.
Unable to change the Key Manager Mode
The controller firmware returned an error when
attempting to change the key manager mode.
Unable to set the Key Encrypting Key
The controller firmware returned an error when
attempting to set Key Encrypting Key name.
Unable to set the boot password
The controller firmware returned an error when
attempting to set the boot password.
Unable to set the boot password state
The controller firmware returned an error when
attempting to set the boot password state.
The controller does not support encryption
An attempt was made to execute an encryption
command on a controller which does not support
encryption.
Controller Encryption is disabled
An attempt was made to execute an encryption
To Next Page
Loading...
