ROI-S04488 OPERATION
3-33
Step
Procedure
4 Enter the specified password from the keyboard and press the
“Enter” key,
Note: When the PC is connected to the NMS/RA terminal to
control the opposite station, enter password for that
station.
5 Press the “0” key and “Enter” key. Then, perform step 8. If the
password should be changed, press the “1” key and “Enter” key,
6 Enter the new password from the keyboard and press the
“Enter” key,
Note: For password, “0” to “9”, “A” to “Z” and “a” to “z”
are available (31 letters maximum).
7 To confirm the password, re-enter the password from the
keyboard and press the “Enter” key,
8 Following menu item is displayed,
Password :
Password :
********
Change password? (no:0 / yes:1) :
Password :
*********
Change password? (no:0 / yes:1) : 1
New password :
Password :
*********
Change password? (no:0/yes:1) : 1
New password :
**********
New password (Re-enter) :
**********
1. Setting
2. Maintenance
3. Monitoring
99. Exit
Select function No. :
To Next Page
Loading...
