NEC PE455UL - Page 10

Important Information
ix
CAUTION
Connecting the power cord to earth
BE SURE TO DO
• Thisequipmentisdesignedtobeusedintheconditionofthepowercord
connected to earth. If the power cord is not connected to the earth, it may
cause electric shock. Please make sure the power cord is earthed properly.
Do not use a 2-core plug converter adapter.
Handling the power cord
BE SURE TO DO
• Whenconnectingthepowercordtotheprojector’sACINterminal,makesure
the connector is fully and rmly inserted. Loose connection of the power cord
could lead to re or electric shock.
DO NOT TOUCH
WITH WET
HANDS
• Donotconnectordisconnectthepowercordwithwethands.Doingsocould
result in electric shock.
UNPLUG THE
POWER CORD
• Whencleaningtheprojector,forsafetypurposesunplugthepowercordfrom
the power outlet beforehand.
• Whenmovingtheprojector,rstbesuretoturnothepower,unplugthe
power cord from the power outlet and check that all connection cables con-
necting the projector to other devices have been disconnected.
• Whenplanningnottousetheprojectorforlong periodsof time, always
unplug the power cord from the power outlet.
Do not use on networks subject to overvoltage.
PROHIBITION
• Connecttheprojector’sLANporttoanetworkforwhichthereisnoriskof
overvoltage being applied.
Overvoltage applied to the LAN port could result in electric shock.
Lens shift, focus and zoom operations
BE SURE TO DO
• Whenshifting the lens or adjustingthe focusorzoom,dosofromeither
behind or to the side of the projector. If these operations are performed from
the front, your eyes could be exposed to strong light and get injured.
• Keepyourhandsawayfromthelensareawhenperformingthelensshiftop-
eration. If not, your ngers could get caught in the gap between the cabinet
and the lens.