NEC PE455UL - When Moving the Projector

2. Projecting an Image (Basic Operation)
34
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned o with the
POWER button.
Be careful to handle the projector.
NOTE:
• WhilethePOWERindicatorisblinkingblueinshortcycles,thepowercannotbeturnedo.
• Donotunplugthepowercordfromtheprojectororfromthepoweroutletwhileanimageisbeingprojected.Doingsocould
deterioratetheprojector’sACINterminalorthepowerplug’scontact.ToturnotheACpowerwhileanimageisbeingprojected,
usethepowerstrip’sswitch,thebreaker,etc.
• DonotdisconnecttheACpowersupplytotheprojectorwithin10secondsofmakingadjustmentorsettingchangesandclosing
themenu.Doingsocancauselossofadjustmentsandsettings.
2-10. When Moving the Projector
Preparation: Make sure that the projector is turned o.
1. Unplug the power cord.
2. Disconnect any other cables.
• RemovetheUSBmemoryifitisinsertedintotheprojector.