NEC PE455UL - Connecting to Multipresenter

7. Connecting to a Network
107
7-2. Connecting to MultiPresenter
Preparations:
• WhenconnectingtheprojectortoawiredLAN,connectaLANcabletotheunit.(→ page 88)
• WhenconnectingtheprojectortoawirelessLAN,installaseparately-soldLANunitintheunit.
(→ page 90)
• Congurethe[NETWORKSETTINGS]oftheprojector.(→ page 109)
• InstalltheMultiPresenterappinthecomputerortabletterminal.
https://www.nec-display.com/dl/en/soft/multipresenter/index.html
The procedure is described here for each wireless LAN prole [INTELLIGENT CONNECTION], [INFRA-
STRUCTURE], and [SIMPLE ACCESS POINT].
① When connecting with an [INTELLIGENT CONNECTION]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Start MultiPresenter.
The target device screen is displayed.
3. Enterthe4-digitPINcodedisplayedinthestart-upscreeninthetargetdevicescreen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.