NEC PE455UL - Making Connections; Connecting Your Computer

83
NOTE:
• Usetheattachedspeciedcableswiththisprojectorsoasnottointerferewithradioandtelevisionreception.
 ForHDMI,LAN,RS-232CandAUDIO,pleaseuseashieldedsignalcable.
 For15-pinminiD-Sub,pleaseuseashieldedsignalcablewithferritecore.
 Useofothercablesandadaptersmaycauseinterferencewithradioandtelevisionreception.
5-1. Connecting Your Computer
Computer cables and HDMI can be used to connect to a computer. The HDMI cable is not enclosed
with the projector. Please get ready a suitable cable for the connection.
NOTE:
• SignalssupportedbyPlug&Play(DDC2)
INPUT
COMPUTER IN HDMI 1 IN HDMI 2 IN
analog digital digital
Yes Yes Yes
NOTE:
• TheprojectorisnotcompatiblewithvideodecodedoutputsoftheNECISS-6020switcher.
• AnimagemaynotbedisplayedcorrectlywhenaVideosourceisplayedbackviaacommerciallyavailablescanconverter.
 Thisisbecausetheprojectorwillprocessavideosignalasacomputersignalatthedefaultsetting.Inthatcase,dothefollowing.
* Whenanimageisdisplayedwiththelowerandupperblackportionofthescreenoradarkimageisnotdisplayedcorrectly:
 ProjectanimagetollthescreenandthenpresstheAUTOADJ.buttonontheremotecontrol.
5. Making Connections