NEC PE455UL - Turning on the Projector

2. Projecting an Image (Basic Operation)
18
2-3. Turning on the Projector
WARNING
The projector produces a strong light. When turning on the power, make sure no one within
projection range is looking at the lens.
1. Remove the lens cap.
With the lens cap’s stopper pressed up, pull
forward and o.
Stopper
2. Press the (POWER) button on the projec-
tor cabinet or the POWER ON button on the
remote control.
The POWER indicator lights blue and the image
is projected on the screen.
TIP:
• Whenthemessage“PROJECTORISLOCKED!ENTERYOUR
KEYWORD.”isdisplayed,itmeansthatthe[SECURITY]feature
isturnedon.(→page46)
After you turn on your projector, ensure that the
computer or video source is turned on.
NOTE:
• Whennoinputsignalispresent,theno-signalguidanceisdis-
played(factorymenusetting).
Standby Blinking PowerOn
Blinkingorangelight Blinkingblue
light
Steadybluelight