NEC PE455UL - Changing the Logo Data (Background Image)

6. Using the VIEWER
104
6-6. Changing the logo data (background image)
• Youcanchangethescreenoftheinputterminalinasignal-lessstate(backgroundlogo)orthe
background image of the MultiPresenter start-up screen (MultiPresenter logo).
• Youcanalsosetapasswordtoprohibitthirdpartiesfromchangingthepictures.
• Youcansetpicturesthatsatisfyallofthefollowingconditions.
Format JPEG or PNG pictures that can be displayed with the [VIEWER]
Resolution Below the panel resolution of the projector
PE455UL: WUXGA (1920 × 1200)
PE455WL: WXGA (1280 × 800)
PE505XL: XGA (1024 × 768)
File size 1 megabyte or less
1. Display the le list screen.
2. Move the cursor to the picture to set
in the background logo or the Multi-
Presenter logo and press the MENU
button.
The pop-up menu will be displayed.
3. Movethecursorto[LOGO]andpress
the ENTER button.
The sub-menu will be displayed.
① Setting the background logo or MultiPresenter logo
1. Movethecursorto[SETTOBACKGROUNDLOGO]or[SETTOMultiPresenterLOGO]inthe
sub-menuandpresstheENTERbutton.
• Ifa[LOGOPASSWORD]hasbeenset,enterthe[LOGOPASSWORD]whenthe[LOGOPASS-
WORD] input screen appears.
• Ascreentoconrmwhethertochangethelogoornotisdisplayed.
2. Movethecursorto[YES]andpresstheENTERbutton.
② Initializing the background logo or MultiPresenter logo
1. Movethecursorto[RESETBACKGROUNDLOGO] or [RESET MultiPresenterLOGO]and
press the ENTER button.
• Ifa[LOGOPASSWORD]hasbeenset,enterthe[LOGOPASSWORD]whenthe[LOGOPASS-
WORD] input screen appears.
• Ascreentoconrmwhethertoinitializethelogoornotisdisplayed.
2. Movethecursorto[YES]andpresstheENTERbutton.