NEC PE455UL - Page 125

6. Using the VIEWER
105
③ Set a password so that the logo will not be changed without authorization
This section explains the procedure for setting the password for the rst time.
1. Movethecursorto[LOGOPASSWORD]inthesub-menuandpresstheENTERbutton.
The [PASSWORD SETTINGS] screen is displayed.
2. Movethecursorto[NEWPASSWORD]andpresstheENTERbutton.
• Thecharacterinputscreenwillbedisplayed.Enterthepasswordusingthe▲▼◀▶ buttons
and press the ENTER button.
• Only1–10alphanumericcharactersareallowedtobeusedinthepassword.
• Whenthepasswordisentered,itwillbeindicatedbyasterisksintheentryeld.
3. Movethecursorto[CONFIRMNEWPASSWORD]andpresstheENTERbutton.
• Enterthesamepasswordagain.
4. Movethecursorto[OK]onthepasswordsettingscreenandpresstheENTERbutton.
The [LOGO PASSWORD] will be set.
TIP:
• Howtoerasetheset[LOGOPASSWORD]
① Movethecursorto[LOGOPASSWORD]inthesub-menuandpresstheENTERbutton.
② PresstheENTERbuttoninthe[ENTERPASSWORD]screen.
③ Enterthepassword,movethecursorto[OK]andpresstheENTERbutton.
 The[PASSWORDSETTINGS]screenwillbedisplayed.
④ Movethecursorto[NEWPASSWORD]andpresstheENTERbutton.
• Movethecursorto[OK]withoutenteringanythinginthecharacterinputscreenandpresstheENTERbutton.
⑤ Movethecursorto[CONFIRMNEWPASSWORD]andpresstheENTERbutton.
• Movethecursorto[OK]withoutenteringanythinginthecharacterinputscreenandpresstheENTERbutton.
⑥ Movethecursorto[OK]inthepasswordsettingscreenandpresstheENTERbutton.
 Theset[LOGOPASSWORD]willnowbedeleted.