NEC PE455UL - Page 130

7. Connecting to a Network
110
④ WIRELESS LAN
Congure the wireless LAN settings.
Item name Description
PROFILE There are 4 wireless LAN proles as shown below.
• DISABLE(initialvalue)
• INTELLIGENTCONNECTION
• SIMPLEACCESSPOINT
• INFRASTRUCTURE
The settings of proles are dierent from each other. This will be explained later.
[DISABLE]
Disable the [WIRELESS LAN] of the projector.
[INTELLIGENTCONNECTION]
Compared to connecting with [INFRASTRUCTURE] or the [SIMPLE ACCESS POINT], it is easier to
connect computers or tablet terminals installed with MultiPresenter to the projector.
Item name Description
PROFILE INTELLIGENT CONNECTION
MODE Select the wireless mode (IEEE802.11b/g/n or IEEE802.11a/n).
• Initialvalue:IEEE802.11b/g/n
CHANNEL Set the wireless channel.
• Initialvalue:AUTOMATIC
SECURITY TYPE Set the [SECURITY TYPE] ([DISABLE] or [WPA2-PSK]).
• Initialvalue:DISABLE
NOTE:
• Whenthe[PINTYPE]setintheMultiPresentersettingsisa[ONE-TIME],the[SECURITYTYPE]
cannotbespeciedasitwillbeappliedautomatically.
SECURITY KEY Set the encryption key.
• Initialvalue:Blank
• Allowablecharacters:Alphanumericsymbols(includingspace)
• Numberofcharacters:8–63characters
When a [SECURITY KEY] is set, a number of asterisks “*” equivalent to the num-
ber of characters is displayed.
NOTE:
• Whenthe[PINTYPE]setintheMultiPresentersettingsisa[ONE-TIME],the[SECURITYKEY]cannot
besetasitwillbesetautomatically.