NEC PE455UL - Page 23

1. Check the product overview, supplied items and part names
3
Network
• CompatiblewithwiredLAN/wirelessLAN
Equipped with a LAN port (RJ-45), the projector can be connected to a wired LAN to transmit
images from a computer to this unit or to control this unit from the computer. In addition, when
a wireless LAN unit sold separately is attached to the unit, the unit can be connected to a wire-
less LAN.
• CRESTRONROOMVIEWcompatibility
The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the
network to be managed and controlled from a computer.
• CompatiblewiththeMultiPresenterapplication
This projector is compatible with the NEC MultiPresenter application, so multi-screen projection
is possible via the network (wired LAN/wireless LAN).
Energy-saving
• 0.11W(100-130VAC)/0.16W(200-240VAC)instandbyconditionwithenergysaving
technology
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving
mode.
NORMAL: 0.11 W (100-130 V AC)/0.16 W (200-240 V AC)
NETWORK STANDBY: 1.6 W (100-130 V AC)/1.8 W (200-240 V AC)
• [ECOMODE]forlowpowerconsumptionand[CARBONMETER]display
The projector is equipped with a [ECO MODE] for reducing power consumption during use.
Furthermore, the power-saving eect when the [ECO MODE] is set is converted into the amount
of reductions of CO
2
emissions and this is indicated on the conrmation message displayed
when the power is turned o and at [INFO.] on the on-screen menu ([CARBON METER]).