NEC PE455UL - Page 51

2. Projecting an Image (Basic Operation)
31
To return the keystone adjustments to default:
1. Displaythe[GEOMETRICCORRECTION]screen,andmakesure[KEYSTONE]isselectedat
[MODE].
2. Press the ▼buttontoselect[RESET]andpresstheENTERbutton.
3. Pressthe◀ or ▶buttontoselect[YES]andpresstheENTERbutton.
The adjustments will be reset.
NOTE:
• Alladjustedvaluessetinthe[KEYSTONE]adjustmentareresettoinitialvalues.