NEC PE455UL - Page 80

4. Using On-Screen Menu
60
AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
NOTE:
• [CLOCK],[PHASE],[HORIZONTAL]and[VERTICAL]canonlybeselectedwheninputtinganalogsignals.
• Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.
• Theadjustmentsfor[CLOCK],[PHASE],[HORIZONTAL],and[VERTICAL]willbestoredinmemoryforthecurrentsignal.Thenexttime
youprojectthesignalwiththesameresolution,horizontalandverticalfrequency,itsadjustmentswillbecalledupandapplied.
 Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[CURRENTSIGNAL]or[ALLDATA]andresetthe
adjustments.
SelectingOverscanPercentage[OVERSCAN]
This allows you to set the appropriate overscan for an incoming signal.
When [AUTO] is selected, the over-scan that is most suitable for the input signal is carried out and
displayed.
Projected image
Overscaned by 10%
NOTE:
• The[OVERSCAN]itemcannotbeselectedwhenVIDEOsignalsareusedorwhen[NATIVE]isselectedfor[ASPECTRATIO].