2-6 Utilities
Main Menu
This section describes the Main Menu parameters. Other menu parameters are
available by selecting submenus. Use the arrow keys to move the cursor to a
parameter and press
Enter
to select a submenu. Items with lighter text are not
available.
BIOS Version
This field displays your system’s BIOS version number.
Processor Type
This field displays your computer’s processor type, including the
Pentium III processor (if installed).
Note:
Windows incorrectly identifies the Pentium III
processor as a Pentium II or Pentium Pro on the General tab
of the Windows System Properties sheet. This does not
effect the performance of the Pentium III processor. The
BIOS correctly detects the Pentium III processor at startup.
Check for a patch to fix the identification in the General tab
at Microsoft’s website (www.microsoft.com) or the NEC CSD
website (www.nec-computers.com).
Processor Speed
This field displays your processor’s speed.
System Memory and Memory Banks 0 - 2
This field displays the total amount of memory installed on your system
board and in which banks the memory is installed.
Language
This field displays the current default language used by the BIOS.
ECC Configuration
This field specifies ECC memory operation.
L2 Cache ECC Support
This option allows error checking on data accessed from the L2 cache.
System Time and Date
These two fields specify the correct time and date. To change them, press
Tab
to highlight the field you want to change, then press the + or – keys
to change the setting.
To return to the Main Menu, press
Esc
. To move to the Advanced Menu, press
the right arrow key.
To Next Page
Loading...
Need help?
General
