NEC Univerge SV8100 - Page 1028

Issue 5.0 UNIVERGE SV8100
1 - 1018 Trunk Group Routing
14-07-01 Trunk Access Map Setup – Trunk
Port Number
Access Map programming may
limit Trunk Group Routing options.
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
15-06-01 Trunk Access Map for
Extensions
Access Map programming may
limit Trunk Group Routing options.
Trunk Access Maps:
1~200
(default = 1)
15-07-01 Programmable Function Keys Assign a function key for Trunk
Group Routing access (code
*02
+ trunk group
#).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
21-02-01 Trunk Group Routing for
Extensions
Assign the trunk routes to
extensions.
Trunk Group Routes:
1~100
Day/Night Mode: 1~8
Route Table Number:
0~100
(0 = No Setting)
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data