NEC Univerge SV8100 - Page 103

UNIVERGE SV8100 Issue 5.0
Automatic Release 1 - 93
80-04-02 Call Progress Tone Detector
Setup – Min. Detection Level
Use this option to set the minimum
detection level.
0~15
detect level 0:
–15dBm(0) to
–30dBm(15)
detect level 1:
–30dBm(0) to
–45dBm(15)
detect level 2:
–40dBm(0) to
–55dBm(15)
default:
Type 1 (DT) – 15
(-25dBm)
Type 2 (BT) – 15
(-25dBm)
Type 3 (RBT) – 15
(-25dBm)
Type 4, Type 5 – 0
80-04-03 Call Progress Tone Detector
Setup – S/N Ratio
Use this option to set the Signal to
Noise ratio.
0~4 (0dB ~ -20dB)
Default:
Type 1 (DT) = 4
(-20dB)
Type 2 (BT) = 4
(-20dB)
Type 3 (RBT) = 4
(-20dB)
Type 4 = 0
Type 5 = 0
80-04-04 Call Progress Tone Detector
Setup – No Tone Time
Use this option to set No Tone
Time.
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 132
(3990ms)
Type 2 (BT) – 132
(3990ms)
Type 3 (RBT) – 132
(3990ms)
Type 4, Type 5 – 0
80-04-05 Call Progress Tone Detector
Setup – Pulse Count
Use this option to set the Pulse
Count.
1~255
default:
Type 1 (DT) – 1
Type 2 (BT) – 1
Type 3 (RBT) – 1
Type 4, Type 5 – 0
Program
Number
Program Name Description/Comments Assigned Data