NEC Univerge SV8100 - Page 1041

UNIVERGE SV8100 Issue 5.0
Trunk Queuing/Camp-On 1 - 1031
Operation
To queue for a busy trunk:
1. Try to access the busy trunk.
2. Dial 850 or press Trunk Queuing/Camp-On key (Program 15-07 or SC 851: 35).
3. Hang up to leave a Trunk Queuing request.
- OR -
Wait Off-Hook to Camp-On to the trunk.
To answer when Trunk Queuing calls you back:
1. Lift the handset.
20-29-01 Timer Class for Extensions Assign the timer class (0~15) to
each extension for each Night
mode. This entry includes virtual
extension number.
0~15
0 = Not assigned
(default = 0)
20-31-01 Timer Class Timer Assignment –
Trunk Queuing Callback
Duration Time
Trunk Queuing Callback rings an
extension for this amount of time.
0~64800 (seconds)
(default = 15 seconds)
20-31-02 Timer Class Timer Assignment –
Callback / Trunk Queuing Cancel
Time
The system cancels an extension
Callback or Trunk Queueing
request after this amount of time.
0~64800 (seconds)
(default = 64800
seconds)
Program
Number
Program Name Description/Comments Assigned Data