NEC Univerge SV8100 - Page 1067

UNIVERGE SV8100 Issue 5.0
Uniform Numbering Network 1 - 1057
44-07-01 Gain Table for ARS/F-Route
Access – Incoming Transmit
Set the gain table to be used
(1~500). If an extension dials
ARS/F-Route number;
The Extension Dial Gain Table is
activated, which is assigned in
Program 44-05.
The Extension Dial Gain Table
follows “Outgoing transmit” and
“Outgoing receive” settings.
If the incoming call is transferred
to another line using ARS/
F-Route;
The Tandem Gain Table is
activated, which is assigned in
Program 44-05.
The Tandem Gain Table follows
the “Incoming transmit” and
“Incoming receive” settings for
incoming line, and “Outgoing
transmit” and “Outgoing receive”
settings for the outgoing line.
For ARS/F-Route calls, the
CODEC gains defined in Program
14-01-02 and Program 14-01-03
are not activated.
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-07-02 Gain Table for ARS/F-Route
Access – Incoming Receive
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-07-03 Gain Table for ARS/F-Route
Access – Outgoing Transmit
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-07-04 Gain Table for ARS/F-Route
Access – Outgoing Receive
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-08-01 Time Schedule for ARS/F-Route Define the daily pattern of the
ARS/F-Route feature. ARS/
F-Route has 10 time patterns.
These patterns are used in
Program 44-09 and Program
44-10. The daily pattern consists
of 20 time settings.
Time Number: 01~20
Start Time =
0000~2359
End Time = 0000~2359
Mode: 1~8
Default = All Schedule
Patterns: 0:00 – 0:00,
Mode 1
Program
Number
Program Name Description/Comments Assigned Data