NEC Univerge SV8100 - Page 1066

Issue 5.0 UNIVERGE SV8100
1 - 1056 Uniform Numbering Network
44-05-05 ARS/F-Route Table – Gain Table
Number for Internal Calls
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for internal
calls (0~500).
0~500
0 = No Setting
(default = 0)
44-05-06 ARS/F-Route Table – Gain Table
Number for Tandem
Connections
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for the tandem
call (defined in Program 44-07).
0~500
0 = No Setting
(default = 0)
44-05-07 ARS/F-Route Table – ARS Class
of Service
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Class of Service
to be used for ARS (0~16). An
extensions ARS COS is
determined in Program 26-04-01.
0~16
(default = 0)
44-05-08 ARS/F-Route Table – Dial
Treatment
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Dial Treatment to
be used (0~15). The Dial
Treatments are determined in
Program 26-03-01.
0~15
(default = 0)
44-05-09 ARS/F-Route Table – Maximum
Digit
Input the maximum number of
digits to send when using the
F-Route.
0~24
(default = 0)
44-05-10 ARS/F-Route Table – CCIS over
IP Destination Point Code
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Set the CCIS over IP Destination
Point Code (0~24).
0~16367
(default = 0)
44-05-11 ARS/F-Route Table – Network
Specified Parameter Table
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Assign the Network Specified
Parameter Table (0~16).
0~16
(default = 0)
44-06-01 Additional Dial Table If an Additional Dial Number Table
is entered in Program 44-05-03,
define the additional dial table
(1~1000) to add digits in front of
the dialed ARS/F-Route number
(24 digits maximum 1-9, 0
* #,
Pause). To enter a wild card/don’t
care digit, press Line Key 1 to
enter a P (pause) symbol.
Up to 24 digits
Enter: 1~9, 0,
*, #,
Pause (press line key 1
to enter a pause)
(default = Not
assigned)
Program
Number
Program Name Description/Comments Assigned Data