NEC Univerge SV8100 - Page 1071

UNIVERGE SV8100 Issue 5.0
UNIVERGE Multimedia Conference Bridge 1 - 1061
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
10-09-01 DTMF and Dial Tone Circuit
Setup
Assign at least one circuit for
DTMF reception (type 0 or 1). Use
the following as a guide when
allocating DTMF receivers:
 In light traffic sites, allocate one
DTMF receiver for every 10
devices that use them.
 In heavy traffic sites, allocate
one DTMF receiver for every
five devices that use them.
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
10-55-01 Package Network Setup – IP
Address
Use to define the IP Address for
the CD-ETIA.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255255.254
192.0.0.1 ~
223.255.255.254
(default =
172.16.1.100)
10-55-03 Package Network Setup – Main/
Add-on
The Main setting is to be utilized to
distribute an IP Address to the
blade.
0 = Main
1 = Add-on
(default = 1)