EasyManua.ls Logo

NEC Univerge SV8100 - Page 1090

NEC Univerge SV8100
1174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 5.0 UNIVERGE SV8100
1 - 1080 Virtual Extensions
15-25-04 DESI-less Page Setup – Answer
Automatic Screen Switching
Define or Disable the page to be
automatically displayed when a
DESI-less terminal answers a call.
0 = Disable
1 = Display page 1
2 = Display page 2
3 = Display page 3
4 = Display page 4
(default = 0)
20-02-19 Virtual Extension Mode Sets the mode of a virtual
extension key that appears on a
DSS console.
0 = No
1 = Yes
(default = 0)
20-04-03 System Options for Virtual
Extensions – Virtual Extension
Delay Interval
Virtual Extensions set for Delayed
Ringing (see Program 15-11) ring
the extension after this interval.
0~64800
(default = 10 seconds)
20-06-01 Class of Service for Extensions Assign the Extension to a Class of
Service.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Turns Off (0) or On (1) the ability
for an extension to program the
Appearance function keys using
Service Code 852.
1 = Off
0 = On
(default = 1 for COS
01~15)
20-10-08 Class of Service Options
(Answer Service) – Virtual
Extension Off-Hook Answer
Turns Off (0) or On (1) an
extension ability to answer an
incoming call on a Call Arrival
Virtual Extension simply by lifting
the handset.
0 = Off
1 = On
(default = 1 for COS
01~15)
20-13-27 Class of Service Options
(Supplementary Service) – Busy
on Seizing Virtual Extension
If set to 1, you can call a busy
extension which is talking on a
virtual extension key. Program
20-13-06 (Call Waiting) must be
set to off for this option to work.
0 = Off
1 = On
(default = 1 for COS
01~15)
21-01-15 System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
In the Extensions Class of
Service, enable (1) or disable (0)
the Outgoing Disable on Incoming
Line feature.
0 = Disable
1 = Enable
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals